Making terrain for 1st Corps 28mm WW2 Operation Kutosov Part II

Its taken longer than intended but here is part II of the terrain blog for the 'Operation Kutosov' game.

 

When the green paint for the grass areas was dry we broke up the  colour using different shades of green and brown spray paint. We used Humbrol  sprays basically because thats what we had at hand.

 

 

 

 

Same idea for the wheat fields, yellow, ochre, sand and pale brown sprays were used.

 

As we'd used an acrylic sealer for the roads we were able to use acrylic paints  to paint the roads.

We went for country dirt roads for a more rural look.

The paints used were emulsion paints mixed for us at a local DIY store. We have a dark earth shade and 2 paler shades for highlighting.

This way we can make sure we  get consistant colours on our figure bases and terrain.

A Corgi 1/50 Panther alongside a 1st Corps 1/48 scale T34

A close up of one of the village strong points usedin the participation game.

Buildings are by Hovels(supplied painted many years ago),fences are the plastic ones by Renedra all mounted on hardboard bases and textured by ourselves.

We'll be releasing our own Eastern Front buildings later this year.

The defensive position at the bottom of the picture as scratch built by ourselves.Maybe thats one for another blog entry.

 

Te game as set up at Partizan in September.

And again.

 

As set up at The Worlds, Derby.

 Unfortunatley the guys that were going to run the participation game couldn't make it to the show  so we set it up as  a static demo game. As w had forgotten the box with the village buildings and some of the German defences we put out every Russian vehicle we had. his came to 15 T34's 3 SU122's and 4 SU85's.

A closer shot of the Russian horde charging across the wheat fields.

All the vehicles and figures are by 1st Corps.

A Corgi Panther awaits the onslaught with 1st Corps German panzer grenadiers  in support.

Materials used.

Teddy bear fur, we used the 'wolf hair ' colour as our base.

supplied by

Fur fabrics and crafts,Tel 0121 7711666

Green paint.  Forest Green fence paint.

Sprays, assorted colours by Humbrol

Acrylic window sealer, dark brown.Available at most DIY stores.

Emulsion paints for roads mixedby local DIY store.

 

 

Making terrain for 1st Corps 28mm WW2 Operation Kutosov

  We've always tried to put on a good looking demo game, so when we decided to do the Operation Kutosov participation game  we thought we'd try something new.

  Phil from the C20th wargames society volunteered to run the game and came up with the rules and scenario.

  We'd seen some impressive looking gaming tables using 'teddy bear' fur so thought we'd give it a try.

The fur would prove to be perfect for the long grass and wheat fields needed for the game.

The colour we chose you use as our base  is called wolf hair, great for the wheat fields.

Roads cut into the fur with a pair of sharp scissors.

  We tried using clippers to trim the fur but found scissors worked far better,if a little hard on the fingers.

Next step was to brush out the loose fur, this helps it stop matting together when the fur is painted.



Brushing out the loose fur.

Testing the acrylic sealer.

As we'd never tried this before we thought it would be a good idea to do a small test piece.



1st Corps 1/48 T34



The sealer we used was from our local hardware shop, it must be an acrylic sealer that will  accept paint. We havn't tried watering it yet, something for the next terrain project.



Roads added.

We used a paint scraper to smooth the sealer onto the roads.



 

Roads and tracks added.



While the sealer was still wet.the surface of the roads were scored with the end of a brush to look like wheel ruts and cork bits added along the edges of the roads as rocks.



Corgi 1/50 Panthers on the move

Ready to start painting.

Using our fingers, wearing rubber gloves we added the paint along the edges of the roads. It takes a bit of working in to get the paint in deep. The paint we used was a forest green fence paint.Its best  as the paint dries to keep brushing the fur so it  doesn't matt together and look clumpy.

The fur along the edges of the roads was trimmed down  prior to painting so the fur didn't overlap the roads.

Once the edges were done we filled in where we wanted green fields leaving areas for the whet fields.

More on finishing the terrain in the next entry.